Operation CHARM: Car repair manuals for everyone.

Air Conditioning - Inoperative

March 12, 1996

BULLETIN NO.
96-007

YEAR
1994-96

MODEL
INTEGRA

VIN APPLICATION
See VEHICLES AFFECTED

Air Conditioning Inoperative

SYMPTOM

The A/C is inoperative. (The initial inspection reveals a loss of refrigerant.)

PROBABLE CAUSE

A hole is rubbed in suction line A by contact with the condenser fan shroud.

VEHICLES AFFECTED

All Integras with A/C:

3-DOORS

1994-95: All

1996:
LS - Thru VIN JH4DC4.. .T8007796
SR - Thru VIN JH4DC2...TS001877
RS - All with dealer installed A/C

4-DOORS
1994-95: ALL

1996:
LS - Thru VIN JH4DB7...TS002253
GSR - Thru VIN JH4DB8...TS00470
RS - All with dealer installed A/C

CORRECTIVE ACTION








Replace suction line A and the receiver/dryer with the parts listed under PARTS INFORMATION.

1. Recover any remaining refrigerant in the System, and inspect suction line A for a rubbed-through hole.








2. Remove suction line A.





3. Install the new suction line A (see PARTS INFORMATION).








4. Replace the receiver/dryer.

5. Reinstall the power steering fluid reservoir onto its bracket.

6. Evacuate the A/C system using a refrigerant Recovery/Recycling/Charging Station. Follow the equipment manufacturer's instructions.

7. Charge the A/C system with 650 to 700 grams (23 to 25 oz.) of HFC-134a refrigerant, and add 20 ml (20 cc, 1/3 fl.oz) of ND-8 refrigerant oil. Do not overcharge the system!

8. Check for leaks using a leak detector designed for HFC-134a refrigerant.

NOTE:
Because HFC-134a refrigerant is heavier than air, always check for leaks 360 degrees around all fittings.

PARTS INFORMATION

Suction Line A: P/N 80321-ST7-A01
Receiver/Dryer: P/N 80351-ST7-A11
ND Refrigerant
PAG Oil (120 ml): P/N 38897-PR7-A07AH

NOTE:
Use this number to order the oil, but do not use it in the warranty claim.





WARRANTY CLAIM INFORMATION

In warranty:
The normal warranty applies.

Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Technical Manager or your Zone Office. You must request consideration, and get a decision, before starting work.

Failed P/N: 80321-ST7-A01
Defect code: 060
Contention code: B06