Dome Lamp: Testing and Inspection
CEILING LIGHT / TEST AND REPLACEMENTWith Moonroof
1. Turn the light switch OFF.
2. Pry off the lens.
3. Remove the two mounting nuts, then pull out the housing.
4. Disconnect the 3-P connector from the housing.
5. Check for continuity between the terminals in each switch position according to the table.
Without Moonroof
1. Turn the light switch OFF.
2. Pry off the lens.
3. Remove the screw, then pull out the housing.
4. Disconnect the 3-P connector from the housing.
5. Check for continuity between the terminals in each switch position according to the table.