XM Receiver Removal/Installation

XM Receiver Removal/Installation

NOTE: The AcuraLink must be reactivated by Acura Client Services when:
- The AcuraLink (XM) unit is replaced.
- DATA RESET was selected while in the self-diagnostic function.
- Vehicle ownership changes.

1. Remove the left side trunk trim.




2. Disconnect the antenna 2P connector (A) and 20P, 16P connectors (B) from the XM receiver (C).
3. Loosen the mounting bolts, then pull out the XM receiver.
4. Install the XM receiver in the reverse order of removal.