Component Tests and General Diagnostics

Imoes Unit Input Test

1. Remove the audio unit. Audio Unit Removal/Installation

2. Remove the passenger's front console cover. Center Console Removal/Installation
NOTE: If necessary, remove the glove box Glove Box Removal/Installation to make a space to see the imoes unit from the front passenger's side.

3. Disconnect the 5P connector (A) from the imoes unit (B).

4. Inspect the connector and socket terminals to be sure they are all making good contact.
- If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.

- If the terminals look OK, go to step 5.

5. With the connector still disconnected, make these input tests at the connector.
- If any test indicates a problem, find and correct the cause, then recheck the system.

- If all the input tests prove OK, go to step 6.





6. Reconnect the connector to the unit, turn the ignition switch to ON (II), and do these input tests at the connector.
- If any test indicates a problem, find and correct the cause, then recheck the system.

- If all the input tests prove OK, replace the imoes unit. Imoes Unit Replacement