Passenger's Dashboard Undercover Removal/Installation

Passenger's Dashboard Undercover Removal/Installation

NOTE: Take care not to scratch the dashboard and related parts.

1. Remove the passenger's dashboard undercover (A).
-1 Gently pull down the front edge to detach the clips.
-2 Disconnect the ambient light connector (B).
-3 Pull the cover away to release the pins (C) from the holders (D).

2. Install the cover in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.

- Make sure the connector is plugged in properly.

- Make sure the pins of the cover are installed securely to the holders.