Sunroof / Moonroof: Adjustments

Moonroof Glass Position Adjustment

The roof panel (A) should be even with the glass weatherstrip (B), to within 0+1/-1 mm (0+0.04/-0.04 in.) all the way around, and to within 13.5+1/-1 mm (0.53+0.04/-0.04 in.) between the roof panel and the front edge of the glass (C). If not, make the following adjustment:

NOTE: Reset the moonroof control unit. Programming and Relearning If glass position is still incorrect go to step 1.






1. Remove the bracket cover.

2. Using a TORX T25 bit, loosen the bolts on each side, and adjust the glass (A).

3. If necessary, repeat on the opposite side.
NOTE: After glass position is mechanically adjusted. Reset the moonroof control unit. Programming and Relearning