Cruise Control Module: Service and Repair

Adaptive Cruise Control (ACC) Unit Removal/Installation

1. Remove the glove box. Glove Box Removal/Installation

2. Remove the passenger's under-dash fuse/relay box. Passenger's Under-Dash Fuse/Relay Box Removal/Installation

3. Remove the bolts from the bracket that holds the hands free link control unit, the throttle actuator control module, and the ACC unit (A).

4. Disconnect the connectors from the control units.

5. Remove the ACC unit from the bracket.

6. Install the unit in the reverse order of removal.
NOTE: If a new ACC unit is installed, do the CMBS initial check (DTC 100). 100