Intermediary Shaft Installation Height Inspection/Adjustment

Intermediary Shaft Installation Height Inspection/Adjustment

1. Install the intermediary shaft (A) in the torque converter housing, and install the original thickness 26.5 mm washer (B) on the intermediary shaft.

Intermediary Shaft Installation Height:
Standard:
137.285-137.385 mm (5.40491-5.40885 in.)

2. Install the new gasket (C) on the torque converter housing.

3. Measure the height (D) of the intermediary shaft installation between the surface (E) of the gasket and the surface of the 26.5 mm washer (F).

4. If the measurement is out of standard, remove the 26.5 mm washer and measure its thickness.

5. Select and install a new washer, then recheck the installation height.

WASHER, 26.5 mm










Intermediary Shaft Cutaway View