Rear Differential Installation

Rear Differential Installation

1. Raise the rear differential (A) with the transmission jack.

2. If the original differential is being reinstalled, install a new set rings (B).

3. Apply 2.0-3.0 g (0.07-0.10 oz) of super high tempurea grease (P/N 08798-9002) to the splines of the rear driveshaft inboard joints (C), then install the rear driveshafts to the rear differential.






4. Install a new front mounting bolts.






5. Install the new rear mounting bolts.






6. Connect the breather hose (A).

7. Connect the rear differential harness connectors (B) and (C).

8. Install the propeller shaft. Propeller Shaft Installation

9. Refill the differential fluid. Rear Differential Fluid Inspection and Replacement

10. Test-drive the vehicle.

11. Check the differential fluid. Rear Differential Fluid Inspection and Replacement