Manufacturer Code Charts: 2702

Navigation System DTC Troubleshooting: 2702

DTC 2702: GPS Diag: Receiver in Navi ECU

NOTE:

- Check the vehicle battery condition first.

- Before you troubleshoot, make sure to follow the general troubleshooting information. How to Troubleshoot the Navigation System (With Navigation)

- Make sure the vehicle is parked outside, away from buildings.

- Check for electronic aftermarket accessories (possibly hidden) mounted near the GPS antenna or the audio-navigation unit.

- Check for aftermarket metallic window tint.

1. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, then back to ON (II), or the ON mode.

2. Go into the Diagnostic Menu, and select the Self-Diagnosis Mode in the Select Diagnosis items menu. Navigation System Diagnostic Mode (With Navigation)

3. Select the System Links, then select the GPS Ant.

Is Receiver in Navi ECU OK indicated?
YES - Intermittent failure, the system is OK at this time. If the unit repeatedly comes back with the DTC, replace the audio-navigation unit.

NO - Replace the audio-navigation unit. Audio-Navigation Unit Removal/Installation (With Navigation)