Advanced Diagnostics

Advanced Diagnostics

DTC P0560: Powertrain Control Module (PCM) Power Source Circuit Unexpected Voltage






General Description
The powertrain control module (PCM) constantly draws power from VBUM to maintain the back-up ram. If the VBUM voltage is a set value or less for a specified time period, the PCM detects a malfunction and stores a DTC.

Monitor Execution, Sequence, Duration, DTC Type






Enable Conditions






Malfunction Threshold
The back-up power supply voltage (at the VBUM terminal of the PCM) is 6 V or less for at least 5 seconds.

Diagnosis Details

Conditions for setting the DTC
When a malfunction is detected, the MIL comes on and a Pending DTC, a Confirmed DTC, and the freeze data are stored in the PCM memory.

Conditions for clearing the DTC
The MIL is cleared if the malfunction does not return in three consecutive trips in which the diagnostic runs. The MIL, the Pending DTC, the Confirmed DTC, and the freeze data can be cleared with the scan tool Clear command or by disconnecting the battery.