Manufacturer Code Charts: 2610

Navigation System DTC Troubleshooting: 2610

DTC 2610: DRAM Diag

NOTE:

- Check the vehicle battery condition first. Testing and Inspection

- Before you troubleshoot, make sure to follow the general troubleshooting information. How to Troubleshoot the Navigation System

1. Clear the hard error code. How to Troubleshoot the Navigation System

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Go into the Diagnostic Menu, and select the Self-Diagnosis Mode in the Select Diagnosis items menu. Navigation System Diagnostic Mode

4. Select the System Links, then select the ECU Info.

Is D-RAM OK indicated?
YES - Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the DTC, replace the navigation unit.

NO - Replace the navigation unit. Service and Repair