Immobilizer Control Unit-Receiver Replacement

Immobilizer Control Unit-Receiver Replacement

1. Remove the driver's dashboard undercover, Driver's Dashboard Undercover Removal/Installation and the driver's dashboard lower cover. Driver's Dashboard Lower Cover Removal/Installation

2. Remove the steering column covers. Steering Column Removal/Installation

3. Remove the ignition switch knob. Ignition Switch Knob Replacement

4. Disconnect the 7P connector (A) from the immobilizer control unit-receiver (B).

5. Remove the two screws and the immobilizer control unit-receiver from the ignition key cylinder (C).

6. Install the immobilizer control unit-receiver in the reverse order of removal.

7. After replacement, the immobilizer control unit-receiver must be registered in IMMOBILIZER with the HDS (all keys and the PCM code are required). Programming and Relearning