Cruise Control Combination Switch Test (With ACC/CMBS)

Cruise Control Combination Switch Test

1. Remove the driver's airbag. Driver's Airbag Replacement

2. Disconnect the 20P connector (A) from the cable reel.






3. Check for continuity between the terminals in each switch position according to the table.

4. If the continuity is not as specified, replace the cruise control combination switch.






5. Use a diode tester between the terminals in each switch position according to the table.

6. If the diode test is not as specified, replace the cruise control combination switch. Cruise Control Combination Switch Replacement (With ACC/CMBS)