Speedometer Does Not Work

Speedometer does not work

Diagnostic Procedure:

1. F-CAN communication line error

2. Gauge control module defective

3. PCM defective

4. Output shaft (countershaft) speed sensor defective

Also check for:

- Check the F-CAN communication line for a DTC. B1168
- Check the F-CAN communication line by using the gauge control module self-diagnostic function. Reading and Clearing Diagnostic Trouble Codes
- Check the speedometer drive circuit in the gauge control module using the HDS.
- Inspect the transmission range switch. Transmission Range Switch Test
- Check for a stored DTC, and check for loose connections.
- Check the speed sensor installation.
- Inspect the sensor O-ring for wear and damage.