Ignition Switch Test

Ignition Switch Test

SRS components are located in this area. Review the SRS component locations Locations and precautions and procedures Service and Repair before doing repairs or servicing.

1. Do the battery terminal disconnection procedure. Procedures

2. Remove the driver's dashboard undercover Driver's Dashboard Lower Cover Removal/Installation and the steering column covers. Steering Column Removal/Installation

3. Disconnect the 7P connector (A) from the ignition switch (B).






4. Check for continuity between the terminals in each switch position according to the table.

5. If the continuity is not as specified, replace the ignition switch. Ignition Switch Replacement

6. Do the battery terminal reconnection procedure. Procedures