Mounting Holes - Modification

Applies To


AUDI QUATTRO TURBO Group


Thru August 1983 53

Subject Key Points Number

Rear Apron Modification of mounting holes

85-53-01

Part Identifier 5305 A-151 August 9, 1985

Modification of Mounting Holes:

When existing stocks of rear apron Part no. 857 807 023 are exhausted, only the wider version Part no. 857 807 033 will be available as a replacement part.

In order to install the wider apron on vehicles produced up to 8/83 with 6J x 15 wheels, or which are being retrofitted with 8J x 15 wheels, the apron mounting hole pattern must be modified.

It is recommended that a template be made from a flexible material, such as plastic, to allow for accurate marking of the new mounting hole locations.

Note

Please note that the uppermost hole has been deleted in the new pattern.