Roam Characteristics - Checking
ROAM CHARACTERISTICS, CHECKINGThe roam characteristics of the phone can be changed to allow the type of service provided (non-wire line A, or wireline b) to be programmed and in what preference.
Complaints of the "NoSvc" light or "Roam" light illuminating constantly can be the result of incorrect or undesirable roam characteristics.
Check roam characteristics as follows:
- switch telephone ON
- press "Rcl" and "*" buttons
^ current roam selection displayed
Note:
Five roam selections are available: standard (Ab or bA), Inverted (bA or Ab), home, non-wireline only and wireline only
- press button repeatedly to advance through the selections
- press "Sto" button to enter desired choice (Standard)
Note:
The best telephone performance is usually obtained with the Standard roam selection setting. Set roam selection to Standard, unless otherwise preferred by customer.