Flywheel: Service and Repair
Dual-mass flywheel
Special tools and equipment
^ Counter hold tool 10-201
Removing
^ Reverse position of counterhold tool 10-201 for loosening/tightening bolts.
^ Mark position of flywheel relative to engine.
^ Unbolt flywheel.
Installing
Installation is carried out in the reverse order or removal.
^ Replace bolts.
Tightening Torque (Part 1 Of 1):
Tightening torque
1) Bolt length
2) 90° corresponds to a quarter turn
3) 180° = 1/2 turn