Windshield: Locations

Windshield, assembly overview







1 - Windshield
- Distance from roof dimension -a- = 6 mm ± 0.5 mm.
- Center in relation to distance from sides dimension -d-.

NOTE: Affix stickers on windshield (e.g. for airbag) in same position on new windshield.

2 - Adhesive bead
- Pay attention to curing times.
- Note different distances from edge of windshield:
- Distance from top and side edges of windshield dimension -b- and dimension -d- = 4 mm
- Distance from bottom edge of windshield measured from inner side of retainer dimension -c- = 10 mm.
- Bead cross section
- Bead width = 8 ± 2mm
- Bead height = 13.5 ± 1.5 mm
3 - Spacer
- 5X
- Bond onto fastening strip, evenly spaced.
4 - Protective strip
- Only installed in new part.
- Only remove after installing windshield and before installing plenum chamber cover.
5 - Plenum chamber cover
- Pull protective strip -4- out of fastening strip before installing plenum chamber cover.
- Press into fastening strip after allowing setting time for glass adhesive.