Gap Molding For Lower Sill, Removing and Installing

Gap Molding For Lower Sill, Removing And Installing







1 - Front gap molding
Removing:
- Remove screws - 3 - at front and rear, release and push back gap molding together with clip - 4 -.
- Remove gap molding sideways.
- To install, insert into door, press gap molding forward into catch and secure with screw - 3 -.
2 - Rear gap molding
- Remove rear gap molding by following procedure for removing front gap molding - 1 -.
3 - Screw
- 1 Nm (9 in.lb)
4 - 4-Clip