Diagram 2/19 (Tracks 239-252)
IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions
Control module with indicator unit in instrument panel insert, Brake Fluid Level Warning Switch, Oil Pressure Switch, Speedometer
ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink
C - Generator (GEN)
F1 - Oil Pressure Switch Locations
F34 - Brake Fluid Level Warning Switch Locations
G5 - Tachometer
G21 - Speedometer
J... - Engine Control Module (ECM)
J234 - Airbag Control Module Common Modules Overview
J285 - Control module with indicator unit in instrument panel insert Common Modules Overview
K2 - Generator (GEN) Warning Light
K75 - Airbag Malfunction Indicator Lamp (MIL)
T2 - Double Connector, black, engine compartment, right
T10 - 10-Pin Connector, black, connector station E-box, plenum chamber
T10c - 10-Pin Connector, violet, connector station A-pillar, left Connector Station
T17d - 17-Pin Connector, red, connector station E-box, plenum chamber Connector Station
T32a - 32-Pin Connector, green, on instrument panel insert
(261) - Ground connection, in wiring harness heated spray jet
(A17) - Wire connection (61), in instrument panel wiring harness
(A121) - Wire connection (High-bus), in instrument panel wiring harness
(A122) - Wire connection (Low-bus), in instrument panel wiring harness
Previous Diagram 2/18 (Tracks 225-238)
Next Diagram 2/20 (Tracks 253-266)