Wiper Arm: Adjustments

Windshield Wiper Blade Park Position, Adjusting

Procedure
- Switch on ignition.
- Actuate touch-wipe function and allow wiper motor to move to end position.
- Switch off ignition.







- Position wiper blades on windshield and align as follows:
- Dimension - a - = 26 mm.
- Dimension - b - = 45 mm

NOTE: The figures given here are the distances between wiper blades and cowl panel grille of plenum chamber at bottom edge of windshield.

- Tighten nuts for wiper arms.
- Switch on ignition.
- Actuate touch-wipe function and allow wiper motor to move to end position.
- Switch off ignition.
- If necessary, re-align wiper arms and tighten nuts again.

Tightening torque

Component Nm
Nut for wiper arm 21