Tools and Materials Available From Regional Sales Centre or Importer

Tools And Materials Available From Regional Sales Centre Or Importer







Service station (e.g. V.A.G 1885, VAS 5189, other or currently available service stations) V.A.G workshop equipment catalog
- The operations "testing, extraction (recycling), evacuation and charging" are to be performed in line with the relevant operating instructions.
- The filters and dryers installed are to be replaced at the latest at the end of the period of use specified in the operating instructions and whenever the station has been drained (keep replacement filter to hand; available from equipment manufacturer, refer to operating instructions).
- Use can also be made of service stations not described here V.A.G workshop equipment catalog.

NOTE:
- This service station comprises the following standard components: Charging cylinder, pressure gauge set, vacuum pump, shutoff valves and charging hoses.
- One quick-release coupling each (for service connections on high and low-pressure side) is included in the scope of delivery of this service station.
- Current vacuum display (LED) appears after pressing the "Evacuate" button again.







Leak detector V.A.G 1796







Leak detection system VAS 6201







Puller for A/C clutch V.A.G 1719 (for "Zexel" compressor)







Adapter set V.A.G 1785/1-10

Adapter for flushing with compressed air and nitrogen

A - 5/8"-18 UNF thread for conical seal
B - Union nut (for connection with O-ring) with thread

- M 18x1.5 V.A.G /1
- M 20x1.5 V.A.G /2
- M 24x1.5 V.A.G /3
- M 28x1.5 V.A.G /4







Adapter
A - 5/8"-18 UNF thread for conical seal
B - Threaded connection for O-ring

- M 18x1.5 V.A.G /5
- M 20x1.5 V.A.G /6
- M 24x1.5 V.A.G /7
- M 28x1.5 V.A.G /8







Valve adapter
A - 5/8"-18 UNF thread for conical seal
B - Internal thread with valve opener

- M 10x1.25 V.A.G /9 (for connections with valve on high-pressure side)
- M 12x1.5 V.A.G /10 (for connections on low-pressure side)

NOTE:
- A Schrader valve is screwed into connection - A -.
- A valve opener must be installed in the charging hose connection.







Air conditioning adapter set V.A.G 1786

A - Adapter with union nut V.A.G /1 (only for connections with small valve insert on low- pressure side)
B - Charging hose with union nut 5/8"-18 UNF (short version)
C - Adapter with service connection V.A.G /2

NOTE: For connections with large valve insert (standard on "Zexel" compressors, gradual change to small valve insert as of 10.94), use is to be made of adapter V.A.G /10 (remove valve from adapter V.A.G /10 or install valve opener in charging hose -B-).