Hydraulic Unit and Brake Lines Assembly Overview, Bosch 5.7

Hydraulic Unit and Brake Lines Assembly Overview, Bosch 5.7






1 - Brake Master Cylinder and Brake Booster

2 - Brake Line

• Master brake cylinder/primary piston circuit to hydraulic control unit.

3 - Brake Line

• Master brake cylinder/secondary piston circuit to hydraulic unit.

4 - Brake Line

• Hydraulic unit to right front brake caliper.

5 - Brake Line

• Hydraulic unit to front left brake caliper.

6 - Brake Line

• Hydraulic control unit to rear left brake caliper.

7 - Brake Line

• Hydraulic control unit to rear right brake caliper.

8 - Brake Pressure Sensor 1 (G201)

• Attached to hydraulic subframe.

• Tightening specification: 20 Nm

• Removing and installing, refer to => [ Brake Pressure Sensor 1 ] Service and Repair.

9 - ABS Hydraulic Unit (N55) with ABS Control Module with EDL (J104)

• Removing and installing, refer to => [ Hydraulic Unit, Bosch 5.7 ] Service and Repair.

10 - Nut

• Tightening specification: 9 Nm.

11 - ESP Bracket

12 - Locking Clip