Door Lock Reminder Light: Service and Repair

Central Locking -SAFE- Indicator Lamp

Removing






- Turn off the ignition and remove the ignition key.

- Remove the front door trim.

- Release the retaining clips - arrows -.

- Remove the central locking Light Emitting Diode (LED) - 1 - down out of the door trim - 2 -.

Installing

Install in reverse order of removal, observing the following:

• The new central locking -SAFE- indicator lamp (K133) must be connected with the door trim wiring harness.

- Disconnect the electrical wire and connect it with the new 0.25 mm2 electrical wire for the central locking -SAFE- indicator lamp.

- Slide the central locking LED in until it engages audibly.

- Install the front door trim.