Operation CHARM: Car repair manuals for everyone.

Passenger Occupant Detection System Deactivation After a Collision







Passenger Occupant Detection System Deactivation After a Collision

Each time an airbag or passenger belt tensioner deploys, a basic setting must be performed on the seat occupied recognition control module. Refer to Vehicle diagnostic tester.

If the seat rails and/or seat pan is replaced after an accident due to deformations resulting from a crash, the passive occupant detection system must be replaced using the "passive occupant detection system service kit". Then, perform the "basic setting" of the passive occupant detection system. Refer to Vehicle diagnostic tester.