Washer Fluid Level Switch: Service and Repair

Windshield Washer Fluid Level Sensor (G33)

Special tools, testers and auxiliary items required

• Drip Tray

Removing






- Remove the right front wheel.

- Remove the rear section of the front wheel housing liner..

- Place a drip tray under the windshield washer fluid reservoir.

- Remove the windshield washer fluid level sensor - item 3 - from the washer fluid reservoir.

- Disconnect the electrical connector - 1 -.

Installing

Install in reverse order of removal. Note the following:

- Check the sealing grommet - 2 - for damage.

- Install the rear section of the front wheel housing liner..