Selector Lever Transmission Range Position Display Unit With Selector Lever Scale Illumination

Selector Lever Transmission Range Position Display Unit with Selector Lever Scale Illumination

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing





- Shift the selector lever into the S position.

- Switch ignition off.

- Carefully pry the selector lever boot out at the side using a (3409) or a small screwdriver - arrows -.

- Fold selector lever boot upward.

- Release retaining spring - 2 - and remove selector lever transmission range position display unit (Y26) - item 1 - - arrow -.





- Disconnect the electrical connector.

Installing

Install in reverse order.