New (First Time) Installation Instructions/Attachment 1

Attachment 1 to S.I. 00 40 89 (1999)

BMW SERVICE INFORMATION INDEX PROGRAM


NEW (FIRST TIME) INSTALLATION INSTRUCTIONS

The following instructions will install your Service Information Index and Retrieval Software.

Please follow these instructions if this is a first time installation of the Service Information Index program on your PC.

1) Turn computer ON.

2) Open diskette drive door.

3) Slide diskette into drive A with label side up and towards you. Do not force or bend the diskette.

4) Exit you DCS menu and answer "NO" to backup.

5) Type the command "CD/" and press ENTER.

6) Type the command "MD ANACOMP" and press ENTER.

7) Type the command "A:INSTALL" and press ENTER.

NOTE: Some PCs are not configured to display the correct prompt. If this occurs type the command "PROMPT $P$G" and press ENTER to display accurate directory listings.

EXAMPLE: Exiting the DCS menu and the prompt reads "C:/ > or "C >" instead of "C:/DCS > ".

8) Installation screen will appear; it will prompt the user to:

a. Press any key to continue installation.

b. Press the "Ctrl" and "Pause/Break" key at the same time to cancel installation.

9) When installation is complete a "C:/ >" prompt will appear.

10) If the prompt does not read "C: DCS >", type the command "CD DCS" and press ENTER.

11) Entering and Exiting the Program:

a. At the "C: DCS >" prompt type the command "ANA". This will execute the Service Information program.

b. At the "C: DCS >" prompt type the command "AUTOEXEC". This will execute the DCS menu.