13 62 591 Removing and Installing/Replacing Pressure Sensor on Left Intercooler

13 62 591 Removing And Installing/replacing Pressure Sensor On Left Charge Air Cooler (N63)







IMPORTANT:
Fan can start up without warning.
It is absolutely essential to disconnect the fan before starting this repair procedure.







Necessary preliminary tasks:
- Read out fault memory of Digital Engine Electronics.
- Switch off ignition.
- Remove left intake port.







Unlock connector (1) and remove.
Unfasten screws (2).
Tightening torque 13 62 7AZ.
Pull pressure sensor (3) out of left charge air cooler.

Installation note:
Replace sealing ring on pressure sensor.







Installation note:
Delete fault memory.