13 62 592 Removing and Installing/Replacing Pressure Sensor on Right Intercooler

13 62 592 Removing And Installing/replacing Pressure Sensor On Right Intercooler (N63)







IMPORTANT:
Fan can start up at any time.
It is essential to disconnect the fan before starting this repair work.







Necessary preliminary tasks:
- Read out fault memory of Digital Engine Electronics.
- Switch off ignition.
- Remove right intake duct.







Unlock connector (1) and remove.
Unfasten screws (2).
Tightening torque 13 62 7AZ.
Pull pressure sensor (3) out of right intercooler.

Installation note:
Replace sealing ring on pressure sensor.







Installation note:
Delete fault memory.