Troubleshooting Hints

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS
1. Check TAIL LPS Fuse by observing operation of exterior lamps.
2. Check grounds G101, G102 and G200 for a clean and tight connection.
^ Check for a broken (or partially broken) wire inside of the Insulation which could cause system failure but prove "GOOD" in a continuity/voltage check. (See Diagnostic Aids for General Troubleshooting Procedures). Diagnostic Aids
^ Check for proper installation of after market electronic equipment which may affect the integrity of other systems (See Diagnostic Aids for General Troubleshooting Procedures). Diagnostic Aids
^ Refer to System Diagnosis.