Bulkhead Replacement

Remove or Disconnect
1. Disable SIR system. Refer to "Disabling the Supplemental Inflatable Restraint (SIR) System."
2. Left sound insulator.
3. Fuse block.
4. Bulkhead harness under hood.
5. Forward lamp harness.
6. Cruise control and wiper connectors.
7. Nuts to body of bulkhead.

Install or Connect
1. Nuts to body of bulkhead.

Tighten
^ Nuts to 3 Nm (27 lb in)

2. Cruise control and wiper connectors.
3. Forward lamp harness.
4. Bulkhead harness under hood.
5. Fuse block.
6. Left sound insulator.
7. Enable SIR system. Refer to "Disabling the Supplemental Inflatable Restraint (SIR) System."