Marker Lamp: Service and Repair

Front Side Marker Lamp

Side Marker Lamp (Buick):

Side Marker Lamp (Oldsmobile):

REMOVE OR DISCONNECT
1. Open hood.
2. (Oldsmobile) Screw to lamp tab.
3. (Buick) Push down on lower snap and lift upper tab to release.
4. Socket by twisting 45 degrees counterclockwise.
5. Bulb and socket from lamp housing.

INSTALL OR CONNECT
1. Bulb into socket.
2. Socket into lamp housing. Secure socket into housing by twisting socket 45 degrees.
3. (Oldsmobile) Screw.

Tighten
^ Screw to 2 N.m (17 lb. in.)

4. (Buick) Snap on lamp.
5. Close hood.