Blower Motor: Service and Repair

BLOWER MOTOR REPLACEMENT

REMOVAL PROCEDURE
1. Remove the right side instrument panel insulator.




2. Disconnect the blower motor electrical connector.




3. Remove the blower motor mounting bolts.
4. Remove the blower motor.

INSTALLATION PROCEDURE




1. Install the blower motor.
2. Install the blower motor bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts to 1.3 N.m (12 lb in).




3. Connect the blower motor electrical connector.
4. Install the right side instrument panel insulator.