Instrument Panel Cluster Lens

REMOVAL PROCEDURE

IP Cluster Lens Replacement: Removal Procedure:

1. Remove the instrument cluster.
2. Remove the voltage-oil pressure gauge module screws form module.
3. Remove the voltage-oil pressure gauge module from cluster lens by pulling back locking tabs and removing.
4. Remove the speedometer-tachometer gauge module screws from module.
5. Remove the speedometer-tachometer gauge module from cluster lens by pulling back locking tabs and removing.
6. Replace lens.

INSTALLATION PROCEDURE

IP Cluster Lens Replacement: Installation Procedure:

1. Install the speedometer-tachometer gauge module to cluster lens.
2. Install the speedometer-tachometer gauge module screws to module.

IMPORTANT: Ensure the locking tabs snap into position on module.

3. Install the voltage-oil pressure gauge module to cluster lens.
4. Install the voltage-oil pressure gauge module screws to module.
5. Install the instrument cluster.