Front Seat Belt System

1. To diagnose a failure of the reminder lamp or tone alarm, refer to Wiring Diagrams. Diagrams

The front seat belt system includes the following components:
^ The left and/or right front seat belt retractor is attached to the center lock pillar and it is also equipped with a shoulder seat belt guide adjuster.
^ The left and/or right front seat buckle with pretensioner are attached to lower inner side of each front seat and are serviced as assembly, for replacement of the front seat belt buckle and pretensioner, refer to seat belt side buckle pretensioner in SIR.
2. The left front seat belt system, includes a seat belt switch in the left front seat buckle which controls a reminder lamp and a tone alarm. When the left front seat belt is buckled, the left front door is closed, and the ignition switch is turned ON, the following events will occur:
^ The tone alarm will not operate.
^ The reminder lamp will not operate
3. When the left front seat belt is not buckled, the left front door is closed, and the ignition switch is in RUN, the following events will occur:
^ The tone alarm will operate for 4 to 8 seconds and then go OFF.
^ The reminder lamp will operate until the driver seat belt is buckled.