Exhaust Tail Pipe Flow Valve Vacuum Pipe Replacement - Reservoir Tank to Valve Solenoid

Exhaust Tail Pipe Flow Valve Vacuum Pipe Replacement - Reservoir Tank to Valve Solenoid

Removal Procedure




1. Raise the vehicle.
2. Disconnect the vacuum line fitting (1) from the flow control valve vacuum tank.




3. Disconnect the vacuum line fitting (1) from the flow control valve solenoid.




4. Disconnect the vacuum line fitting (1) from the rear chassis vacuum line.
5. Remove the vacuum line from the vehicle.

Installation Procedure

Important: Do NOT remove the thermal wrap insulation from the vacuum hose.




1. Install the vacuum line to the vehicle.
2. Connect the vacuum line quick connect fitting (1).




3. Connect the vacuum line fitting (1) to the flow control valve solenoid.




4. Connect the vacuum line fitting (1) to the flow control valve vacuum tank.
5. Lower the vehicle.