Differential Assembly

Carrier Type		Integral
Ring Gear Pinion Backlash	Method	Shims
	Adjustment	.005-.009 Inch (in)
Pinion Bearing Preload	Method	Spacer
	New Bearings	24-32 Inch Pound-Force (in.lb) Note: Use inch-pound torque wrench on pinion shaft nut.
	Used Bearings	8-12 Inch Pound-Force (in.lb) Note: Use inch-pound torque wrench on pinion shaft nut.
Differential Bearing Preload	Method	Shims
	New Bearings	.008 Inch (in)
	Used Bearings	.008 Inch (in) Note: Total preload measured with torque wrench at pinion flange nut with new seal installed. 35-40 inch lbs., new bearings; 20-25 inch lbs., used bearings.