Operation CHARM: Car repair manuals for everyone.

Wiper Motor: Service and Repair


CORVETTE
1982

1. Make sure wiper motor is in ``Park'' position.
2. Disconnect washer hoses and electrical connectors from assembly.
3. Remove the air intake screen.
4. Remove the nut which retains the crank arm to the motor.
5. Remove the ignition shield and distributor cap to gain access to the motor retaining screws or nuts. Remove left bank spark plug wires from the cap and mark both cap and wires for aid in reinstallation.
6. Remove three motor retaining screws or nuts and remove motor. Wiper motor must be in the ``Park'' position prior to installation on the cowl. Do not install a motor that was dropped or hung by the drive link.