| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| Add Following Operations If Performed With Piston & Ring Jobs |
| Main Bearings, Renew | 1.3 | 0.0 | A | Add The Following Operations If Performed Along With Piston & Ring Jobs. |
| Crankshaft, Renew | 3.5 | 0.0 | A | Does Not Include: R&R Engine. |
| Oil Pump, Renew | 0.6 | 0.0 | A | Does Not Include: R&R Engine. |
| Oil Pump Screen, Clean | 0.2 | 0.0 | A | Does Not Include: R&R Engine. |
| Rear Main Oil Seal, Renew | 1.1 | 0.0 | A | Does Not Include: R&R Engine. |
| Timing Chain or Gears, Renew | 1.1 | 0.0 | A | Does Not Include: R&R Engine. |
| Tune-Up | 0.6 | 0.0 | A | See Valves Grind Head Removed And Combinations. |
| Note |
| With AC, Add | 0.5 | 0.3 | A | Include: R&R Cylinder Heads & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With C.C.C., Add | 0.5 | 0.3 | A | Include: R&R Cylinder Heads & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With Cruise Control, Add | 0.4 | 0.2 | A | Include: R&R Cylinder Heads & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| With PS, Add | 0.7 | 0.4 | A | Include: R&R Cylinder Heads & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| One CYL |
| Right Bank | 8.3 | 5.3 | A | Include: R&R Cylinder Heads & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Left Bank | 8.2 | 5.2 | A | Include: R&R Cylinder Heads & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Each Additional | 0.7 | 0.4 | A | Include: R&R Cylinder Heads & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| All Cyls |
| Right Bank | 9.5 | 6.5 | A | Include: R&R Cylinder Heads & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Left Bank | 9.4 | 6.4 | A | Include: R&R Cylinder Heads & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Both Banks | 13.9 | 8.9 | A | Include: R&R Cylinder Heads & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |