N: Coolant Temp Display Indicated LO Constantly

N: Coolant Temp Display Indicated LO Constantly

Disconnect the Coolant Temperature Sender and ground DK GRN (35) wire at the Coolant Temperature Sender connector. Turn the Ignition Switch to RUN and observe the COOLANT TEMP Display.

- If the COOLANT TEMP Display indicates 330 °F (170 °C), replace the Coolant Temperature Sender.
- If the COOLANT TEMP Display does not indicate 330 °F (170 °C), check DK GRN (35) wire for an open. If the DK GRN (35) wire is OK, replace the Instrument Cluster.