Window Glass: Service and Repair

WINDOW GLASS

Removal

1. Disconnect battery ground cable.
2. Remove armrest.
3. Remove speaker grille.
4. Remove door trim panel as previously described.(Body and frame/doors hood and trunk/door/door panel)Doors
5. Remove water separator.
6. Mark location and loosen anti-rattle pads (2). Move to facilitate glass removal.
7. Move regulator. into position to access glass nut holes in inner mounting plate.
8. Mark position and remove stabilizing guide and glass top.
9. Remove (3) glass to regulator nuts. Remove glass, remove studs and stop on glass through slot at top. of door.

Installation

If replacement of glass is necessary, transfer studs... and stop to new glass. Reverse removal procedure to install glass. Adjust as necessary and clean glass.