Service Procedure, Campaign Label & Claim Information

SERVICE PROCEDURE

Windshield removal and reinstallation can be accomplished by following the procedure listed in the 1988 Cavalier Service Manual, Body Service Section 2E. The "Extended Method" must be followed as comPlete replacement of the urethane adhesive is necessary.

NOTICE: THE POLY-URETHANE SYSTEM IN KIT PART NUMBER 9636067 IS THE ONLY SYSTEM RECOMMENDED FOR THIS PARTICULAR REPAIR.

Also replace the Windshield Reveal Molding, P/N 10103279.

Install Campaign Identification Label.



CAMPAIGN IDENTIFICATION LABEL

Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label". Each label provides a space to include the five (5) digit dealer code of the dealer performing the campaign service. This information may be inserted with a typewriter or a ball point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for periodic servicing by the owner.

Apply "Campaign Identification Label" only on a clean dry surface.



CLAIM INFORMATION

Submit a Product Campaign Claim with the information indicated below:
* Campaign Administrative Allowance

** The "Parts Allowance" should be the sum total of the current GMSPO Dealer Net price plus 30% of all parts required for the repair.

Dealers will automatically receive the correct labor and material allowance based on the labor operation performed.

Refer to the Chevrolet Claims Processing Manual for details on Product Campaign Claim Submission.