| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| Without Port Injection |
| One Cylinder |
| Left Bank | 9.2 | 6.6 | A | Includes: R&R Cylinder Head, Oil Pan & Plastigage Bearings. |
| Both Banks | 15.8 | 11.3 | A | Includes: R&R Cylinder Head, Oil Pan & Plastigage Bearings. |
| All Cylinders |
| Right Bank | 13.6 | 9.7 | A | Includes: R&R Cylinder Head, Oil Pan & Plastigage Bearings. |
| Left Bank | 11.9 | 8.5 | A | Includes: R&R Cylinder Head, Oil Pan & Plastigage Bearings. |
| Both Banks | 23.2 | 16.6 | A | Includes: R&R Cylinder Head, Oil Pan & Plastigage Bearings. |
| With Port Injection |
| One Cylinder |
| Right Bank | 13.4 | 9.6 | A | Includes: R&R Cylinder Head, Oil Pan & Plastigage Bearings. |
| Left Bank | 12.5 | 8.9 | A | Includes: R&R Cylinder Head, Oil Pan & Plastigage Bearings. |
| Both Banks | 18.6 | 13.3 | A | Includes: R&R Cylinder Head, Oil Pan & Plastigage Bearings. |
| All Cylinders |
| Right Bank | 15.4 | 11.0 | A | Includes: R&R Cylinder Head, Oil Pan & Plastigage Bearings. |
| Left Bank | 14.4 | 10.3 | A | Includes: R&R Cylinder Head, Oil Pan & Plastigage Bearings. |
| Both Banks | 22.1 | 15.8 | A | Includes: R&R Cylinder Head, Oil Pan & Plastigage Bearings. |
| Note |
| With AC, Add | 0.8 | 0.5 | A | |
| With C.C.C., Add | 0.5 | 0.3 | A | |
| With Cruise Control, Add | 0.2 | 0.1 | A | |
| Add Following Operations If Performed With Piston & Ring Jobs |
| Crankshaft, Renew | 5.3 | 0.0 | A | Engine Removed. |
| Main Bearings | 1.1 | 0.0 | A | |
| Oil Pump, Renew | 0.9 | 0.0 | A | |
| Oil Pump Screen, Clean | 0.2 | 0.0 | A | |
| Rear Main Oil Seal, Renew | 1.8 | 0.0 | A | |
| Valve Grind |
| See Valves, Grind (Head Removed) & Combinations. |
| Tune-Up | 0.8 | 0.0 | A | |