| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| Add Following Operations If Performed With Piston & Ring Jobs |
| Camshaft, Renew | 5.8 | 0.0 | A | |
| Main Bearing, Renew | 1.5 | 0.0 | A | |
| Crankshaft, Renew | 6.8 | 0.0 | A | |
| Oil Pump, Renew | 0.9 | 0.0 | A | |
| Oil Pump Screen, Clean | 0.2 | 0.0 | A | |
| Rear Main Seal, Renew |
| Manual Trans | 2.0 | 0.0 | A | |
| Auto Trans | 1.5 | 0.0 | A | |
| Timing Chain, Renew | 1.9 | 0.0 | A | |
| Valve Lifters, Renew |
| Right Bank | 3.0 | 0.0 | A | |
| Left Bank | 2.7 | 0.0 | A | |
| Both Banks | 3.4 | 0.0 | A | |
| Tune-Up | 0.8 | 0.0 | A | |
| Note |
| To Grind Valves, Add | 3.8 | 2.7 | A | |
| With Folding Top, Add | 0.7 | 0.4 | A | |
| One CYL |
| Right Bank | 15.1 | 10.8 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinders And Plastigage Bearings. |
| Left Bank | 13.2 | 9.4 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinders And Plastigage Bearings. |
| Both Banks | 19.7 | 14.1 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinders And Plastigage Bearings. |
| Each Additional | 0.7 | 0.4 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinders And Plastigage Bearings. |
| All Cyls |
| Right Bank | 16.8 | 12.0 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinders And Plastigage Bearings. |
| Left Bank | 14.8 | 10.6 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinders And Plastigage Bearings. |
| Both Banks | 22.7 | 16.2 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinders And Plastigage Bearings. |