Key Replacement - Spare Key Available

Interrogator Tool For Passkey Systems:

Key Resistance Chart:

KEY DUPLICATION PROCEDURE - SPARE KEY AVAILABLE
The J35628 Interrogator or equivalent can be used to determine the proper electrical code of the key. If interrogator is not available, Testing and Inspection PASS-Key I / Checking Key Resistance Pellet.

1. Insert the customer's spare ignition key into the key code reader on the J35628 interrogator.
2. Press the on-off rocker switch to the ON position.
3. A number from 1 to 15 will appear in the window designating the electrical code of the key.
4. Cut a new key having the electrical code determined from the J35628 interrogator.
5. Start the engine using the new key to insure that the key is correct both mechanically and electrically.