Throttle Position Sensor: Adjustments

System Description:
The Throttle Position Sensor (TPS) is not adjustable. Upon TPS or throttle body replacement, TPS learn procedure must be performed. The TPS learn procedure allows the Electronic Brake Control Module (EBCM) to access accurate information from the ECM. This information is utilized to carry out ABS/ASR system functions.


Throttle Position Learn Procedure:
This procedure requires a T-1 (Tech 1) or T-100 (CAMS) unit. This procedure will utilize the Tech 1.

1. Ignition "OFF".
2. Connect Tech 1 with 88-92 BRAKE CARTRIDGE.
3. Ignition "ON".
4. Follow menus to reach ABS/ASR features.
5. Select "F5: TPS LEARN".
6. Press the up arrow to begin learn procedure.
7. Wait for Tech 1 to indicate "COMPLETE".
8. Turn ignition "OFF".
9. Disconnect Tech 1.