Installation of Engine Oil Dipstick

1. Open vehicle's engine compartment hood.

2. Locate the engine oil dipstick ("ENGINE OIL" is painted on dipstick) located to the left of the air cleaner when looking at engine from front of vehicle.

3. Remove old dipstick from vehicle. Place in shipping tube and dispose of properly.

4. Wipe new dipstick clean and insert all the way into engine dipstick tube.

5. Check engine oil level.

a. Pull out dipstick and clean it with a paper towel or cloth.

b. Push dipstick back into dipstick tube all the way.

c. Remove dipstick again, keeping tip lowered.

d. If oil is at or below the "ADD" line, you need to add some oil.

6. Add oil, if necessary.

a. Remove ENGINE OIL FILL cap (located next to ENGINE OIL dipstick).

b. Add enough API SERVICE SG 5W-30 engine oil (see Owner's Manual for further instructions on using the right kind of oil) to raise the indicated level above the ADD level to within the cross-hatched OPERATING RANGE (not to be above the OPERATING RANGE). No more than 1 quart of oil should be necessary.

c. Push dipstick all the way back in the dipstick tube when through.

d. Reinstall ENGINE OIL FILL cap and tighten.

NOTICE:
You may choose to have this procedure performed at your Chevrolet dealer, at no charge. Please contact your local Chevrolet dealer to schedule an appointment.